Meizu MX4 dropped in water | Ultimate Solutions
Hey! These most valuable ideas and guidance will really be helpful for the users of the Meizu MX4. Imagine if your smartphone turns off after falling into the water. Then do not try to turn on the device. It will make more damages to the device. Even though the circuit boards are protected from the wet soon after the water drops fell on the device, the chips may get serious damages at times they cause hardware errors such as hard bricking forever. We will explain the Solutions for Meizu MX4 Fell in Water.
It is pretty sure that water damages could happen at any time. Imagine, the phone may fall in the water today but the causes may appear after a week or so. Ultimately, the users complain their device turns off and it is impossible to turn it on again. If not they have to face the issue of a black screen on the device.
For sure, you need to be aware of the things you should do and do not soon after the device gets wet, how to open for the functions, and finally turn the device off after you take underwater images. Be aware! The warranty may not cover the destructions which happen due to the spread of the liquid. Even though you do not get the warranty, you have to take action to fix the case. So, here we explain the facts in detail. You can freely read them and try to get an idea to solve the issues. Further reading; increase RAM on Android device
Table of Contents
Turn off the phone immediately/ do not turn it back on
Soon after the Meizu MX4 fell in the water, you may notice three things that may happen to the device.
- If the holes in the device are well secured, the wet condition may not cause for the device.
- The smartphone may remain slight lights from time to time.
- Most probably, the smartphone may turn off
On the other hand, if it works as usual even after the device fell into the water, no need to worry. Be mindful to pay attention to the very device for about a week because at times the causes may appear after some time. In case, the wet condition absorbs the device, you may notice several changes in the device such as quick reboots and sudden turn-off of the device. Moreover, you have to be quick enough to take action against the bad situation. We recommend cleaning the Meizu MX4’s surface including the holes to avoid the issue up to an extent.
Besides, you may see the changes of the device like dimming the screen and flickering, quick reboots, and sudden turn-off of the device. They are predictions of the worse situation of felling the Meizu MX4 into water. The power supply and the water do not match, in case if they are connected, the worse arrives soon.
Beyond the fact, if the device turns off soon after the moisture, never try to turn on the Meizu MX4. This can be taken as a tip when there is a tiny power supply. Be aware! If you try to turn on the device by force, the damages may double. It is a bit difficult to find out which part has been damaged. In the same way, it is difficult to say whether the partition is easy to fix or not. At times, when you try to place the component back, it is not an easy task. Sure, in this case, you have to meet an expert in the technical world and ask the help.
Never attempt to charge the water damaged Meizu MX4
As we discussed in the early section, you know that it is not allowed to turn the device on after it fell into the water. In the same way, do not try to plug the device into the charger. Do you know why it is not allowed? It is because the current short may destroy the both charger and the device. So, do not try it. Perhaps, the very condition may lead to exploding the charger and the device due to an error in the power supply.
Do not shake the Meizu MX4, unmount both SIM and MicroSD cards instead
Sometimes, you may try to shake the device soon after it gets from the water. It will help the water to spread along with the device and make more destructions. Here, we suggest you remove both SIM cards and SD cards. Both elements are vulnerable to water so easily.
Hold the Meizu MX4 upright
The users know that there are no holes in the sides of the device. In addition, there is a tiny hole of 3.5 mm for the headphone jack. In fact, the water may get into the holes of the USB, and utility port. This leads the water to flow inside of the device.
Do you use a hairdryer to heat the device, after it fell on the water? Not to practice such stupid ideas. Unless the water dries out little by little, you may have not any other option to get back the water from the inside of the device.
Put the Meizu MX4 in a bowl of rice
Here is another solution for you to fix the issue. Imagine, if you are unable to contact a technical person you have to take a basket of rice and put the device in it. Here, irrespective of any kind of unusual errors you have to do this.
You may wonder why we suggest using a basket of rice instead of cloth. Sure! Rice has the power to absorb the water even faster than cloth. In case, if you can not contact the technician for further precautions, it is possible to keep the device in the rice basket. Finally, you can further observe whether there are any abnormal performances in the Meizu MX4. If you notice any damage you can meet the technician and get help.
Meanwhile, the same tips can be applicable even when the liquid flows on the device. For sure, the technical person also may practice the same methods. The only thing is they have smooth and specific tools for each task.
All in all, now you may have a proper idea of how to manage the Meizu MX4 after it exposes to the water. Solutions for Meizu MX4 Fell in Water will end up with broad explanations. Try to practice these methods and in case if you can not fix the issue get the help of an expert in the technical field.
Stay in touch with us!
Frequently Asked Question
The microphone does not work after water damage
Important! The first thing you need to do is check if the device is dry. You can dry your device by following 3 steps.
- Keep the Device in a dry place for about 5-8 hours to evaporate the moisture.
- Use a hairdryer to remove any liquid from the Device. (Do it at your own risk)
- Keep the Device in a bag full of rice for about 48 hours. (Recommed Method)
It does not work? Read More: microphone not working
My Meizu MX4 won’t stop vibrating after getting wet in the rain.
I think the retained humidity is causing you troubles. you need to dry your phone not only outside but also completely. Although the most common way to dry the phone is to put the phone in a dry rice bag, I recommend you use silica gel. You just have to turn the phone off, and then put it in a small box on top of a layer of silica gel. Now cover it up with more gel and let it dry for a couple of days. Vibration not working
Audio Problems after water damage
Important! The first thing you need to do is check if the device is dry. You can dry your device by following 3 steps.
- Keep the Device in a dry place for about 5-8 hours to evaporate the moisture.
- Use a hairdryer to remove any liquid from the Device. (Do it at your own risk)
- Keep the Device in a bag full of rice for about 48 hours. (Recommed Method)
It does not work? Read More: How to fix Audio Problems
low audio on calls after water damage
Important! The first thing you need to do is check if the device is dry. You can dry your device by following 3 steps.
- Keep the Device in a dry place for about 5-8 hours to evaporate the moisture.
- Use a hairdryer to remove any liquid from the Device. (Do it at your own risk)
- Keep the Device in a bag full of rice for about 48 hours. (Recommed Method)
It does not work? Read More: How to fix low audio on calls on Android Device
The touch screen is not responding after water damage
My personal recommendation is to let the phone sit in the rice for about 48 hours. That will help to dry the water retained inside the phone. I know you can’t stay whole two days without your device. But if you do not do it, you will never be able to use the device. Must be given at least 24. Read More: Android Device touchscreen is the unresponsive issue
Meizu MX4 does not charge After Dropping In Water
Important! The first thing you need to do is check if the device is dry. You can dry your device by following 3 steps.
- Keep the Device in a dry place for about 5-8 hours to evaporate the moisture.
- Use a hairdryer to remove any liquid from the Device. (Do it at your own risk)
- Keep the Device in a bag full of rice for about 48 hours. (Recommed Method)
It does not work? Read More: How to fix a phone that won’t charge
Connect with us
We are always for you whenever you need our help in the technological field. We try to solve the issues as soon as possible. Contact us anytime. For sure, this service is free for you. But, we get a large number of emails daily. So, at times it is a bit difficult to reply to all of the e-mails. In order to aid you within quick moments, we create a flexible way, community to offer you maximum support. You can visit simply the topic of Help and tap on the community that displays for each section. if this post makes you aware of the methods or helpful share this with your friends on Facebook and other social media. Make sure whether you like us on Facebook.