How to wipe all data from an Android device

Android device

Figure of Android device

Android device: Are you prepared to transfer ownership of your gadget to a new owner or sell it? May you need a new start or your phone isn’t functioning properly. Whatever the situation, there are occasions when a factory reset of Android is your best option to restore it to its default settings (at least software-wise). Let me demonstrate all you need to know about the procedure.

A word of warning

Let’s get the disclosure out of the way first and foremost. All of your data will erase and the software will restore to its default settings if you perform an Android factory reset. This implies that all applications and data on your device will erase. Before continuing, make sure to back up all important files and data. A method for backing up your Android phone is available via the link directly below.

Android device

We are aware that starting over might be difficult. The backup procedure is not straightforward, and downloading all of your data again can take some time. If you aren’t using Wi-Fi, it can potentially drain your data. This is why we frequently advise against factory resetting Android and instead look for a simpler alternative.

If you’re planning to factory reset your Android because your phone isn’t working properly, consider looking up your issue in our guide to Android issues and solutions.

Factory reset Android using the Settings

Android device

Using the settings, here’s how to factory reset an Android phone:

Make sure the gadget is plugged in or has sufficient battery life to perform the reset.

  • Launch the Settings app.
  • Choose System.
  • Enter the Reset menu.
  • Tap Delete All Data (factory reset).
  • Click Erase All Data.
  • Whenever asked, enter your PIN.
  • Select Delete every piece of data and let the phone operate normally.
Android device
Android device
Using the settings
Using the settings

Factory reset Android using Recovery Mode

Recovery Mode

Unable to access their settings may be a problem for some users. The phone or software could at fault for this. Fortunately, there is a way to accomplish this without using the consumer UI.

How to use Recovery Mode to wipe all data from an Android device:

Make sure you turn off your phone.

  • simultaneously holding down the Volume Down and Power buttons.
  • Press them repeatedly until the screen appears.
  • There will writing, navigational instructions, and the word “Start” pointing toward the power button on the screen.
  • Now, you may navigate with the Volume keys and select items using the Power button.
  • Press the Volume Down button until Recovery Mode appears.
  • Press the Power button to select it.
  • Press and hold the Power button, then while keeping the Power button pressed, press the Volume Up button.
  • To choose the choice, press the Power button.
  • Select Factory data reset to confirm, then let the phone finish its work.
  • Select Reboot system now when finished.

FAQ

How can I enable safe mode on an Android device?

Press and hold the power key when the device turns on. Press the Power key to bring up the pop-up menu. Until the Reboot to safe mode message appears, touch and hold Power off. To restart in safe mode, press OK.

Without using the power button, how do I exit safe mode on Android?

Thank goodness, there is one. On some Android phones, you may turn off safe mode by using the notifications menu. To turn off Safe mode, all you have to do is swipe down from the top of your screen until you find the option that says it’s on. Your phone will restart in normal mode and safe mode will disables.

How do I turn on safe mode?

Hit the power button on your phone. Press and hold the volume-down button on your phone as the animation begins. Hold it down until the animation finish and your phone enters safe mode. “Safe mode” will be shown at the bottom of your screen.

Why is Safe Mode on my phone stuck?

A stuck or broken button is the most common cause of a phone or tablet that always boots into safe mode. Your device should be free of any cases or gel skins. If the Menu key is pressed while the case is running, Safe Mode may load.

Leave a Reply