Solutions for low audio calls on Meizu MX3
Calling issues are considered the worst among the issues that can be arisen on Meizu MX3. Sometimes, you may already experience them daily. So, in this article, we boost up your knowledge on the solutions for low audio on calls on Meizu MX3. Let us go through them.
Problem; Low audio voice on calls. sound does not work while the phone rings, even the volume up key is pressing. In the same way, the sound is not audible enough. Then, the speakerphone applies to the task. The very issues arise time by time. So, it may be a software error. Soon after the update of the Meizu MX3, the issue happens. There is no screen guard and Bluetooth does not turn on. The volume is raised to the maximum. At last, the speaker is held up.
Table of Contents
Solutions for low audio on calls Meizu MX3 | sound is low during calls
According to the details, this may be an error in the software. As it explains, the volume settles with maximum, the speaker works well, and Bluetooth does not respond. So, you need to pay attention to the software issues which direct to the issue of low audio on calls on Meizu MX3. We will go ahead with the methods to Fix low audio on calls on Meizu MX3.
Verify notifications are set to max
For sure, the updates may make changes in device volume if not, the issue happens due to other apps. Here, you can check the volume in each app. Finally, you can set each volume option under your desire. How to check the volume level? Open settings > Sound and vibration. There, you can put the volume as you need. When you go to the settings app, you can find many options. As the initial fact, set the Sound mode. When you see more options, you may notice the option of, Answering and ending calls. At times, this option may bring the issue to your phone. If so, you can adjust it.
Force close “Phone app“; Solutions for low audio calls on Meizu MX3
In fact, if the phone app notifies that it stops working, you are getting to trouble because of its error. In this situation, you can Force Stop the App. Normally, there are certain reasons for the issue of not working the phone app.
Follow these steps to Stop the App:
- Open the screen
- Click on the recently used apps
- Move to the two directions to find the Settings app.
- Scroll up on the app. It will close.
- It is known as force close.
- Unless you are able to find the apps, tap on all apps
Force reset before calling ; Solutions for low audio calls on Meizu MX3
In the previous section, we restart the app. But, if you can’t fix the issue. You can perform a soft restart. By doing a restart, it helps to erase the system and fix the issues in the phone. There are simple steps that you have to practice. First, click on the power button and the volume down button together. Stay about 10 seconds. When the device sets to restart, release the buttons. Reset supports to avoid the arising issues in the device. We suggest you restart the Meizu MX3 smartphone once time for a week. This process helps to erase the upcoming issues in your device.
Clear cache on Meizu MX3 ; Solutions for low audio calls on Meizu MX3
We think it is better to clear the cache in the “phone app”. It is a simple and easy method to fix the issue. How to clear the cache in the Phone app;
- Go to settings.
- Click on the Apps
- click on more settings
- Tap on show system apps
- Select the phone app and click on it
- go to the storage in phone app
- at last, tap on the clear cache icon.
- The phone performs the restart
Finally, better to check the restart works well or not.
Enable Safemode on Meizu MX3 ; Solutions for low audio calls on Meizu MX3
Do you feel the low voice issue happens soon after You installed an app on your Meizu MX3? If so, you need to remove the particular app. further, if you can’t remember the recently installed app, safe mode will help you.
IMPORTANT; Safe mode will secure the data in your device.
Sometimes many apps will not function with Android or another app. Make sure to test the issue of low audio calls in your Meizu MX3.
Read More: What Can Do With Safe Mode
How to turn on the safe mode;
- turn off the device.
- press and hold down the Power button
- release the button after “Meizu” displays on the device screen
- soon, press and hold the volume down key
- “Safe Mode” will display in the top of the screen
- Then, Release the volume button
- At last, your device is in the Safe Mode.
For sure, third-party apps will not function when the device is set to safe mode. In general, all kinds of previously installed apps will not work in safe mode. By doing so, you can get to know whether the issue happens due to an error in a third-party app. If so, you have to uninstall the particular apps that you installed in recent times. After the process, go and check whether the issue is solved totally or not.
Wipe cache partition on Meizu MX3
Meizu MX3 keep the cache in its’ system. Internal storage in the device keeps the Cache partition. Cache partition supports the speedy functionality in the apps. When you get into new updates or when you install new apps, the cache may erase from the Meizu MX3. Even though you are not aware of it, the damaged cache partitions destroy the flow of the running system in the device. All in all, you need to check whether the cache is good or not. However, we think it is better to clear the cache on Meizu MX3.
- Turn the device off
- click and hold the Volume Up key
- tap and hold the Power key.
- when you release the keys the green Android logo will appear.
- Click on the volume down key a few times. Then, you need to Highlight wipe cache partition.
- press the power button. It helps to select the option.
- Press the volume down key. Then, highlight the option, ‘yes’. So, Click the power button.
- Now Tap the Reboot
Update the software and apps on Meizu MX3
Indeed, when you are unable to do the updates on time, the very issue of low voice on calls arises. to overcome the worse situation, you better check for the newest updates and try to update the Meizu MX3 on time. Be careful! If there are any update is available, It is compulsory to do updates in software. Imagine, if you do not get the notifications on new updates, we suggest you follow these steps;
- open settings app
- Click on the software update
- Tap on Download
- install the software
- stay few minutes. Until The device checks for the updates and inform.
- Install the updates (If new update is available, your device will notify you)
Factory reset; Solutions for low audio calls on Meizu MX3
Up to now, we go through the methods on how to Fix low audio on calls on Meizu MX3. Here is the final method, which is to reset the device. While your smartphone troubles due to the issues in software and applications, we suggest you apply this tip on the device. First, create a backup for your personal data. (unless you back the data up, they may destroy)
- turn off the Meizu MX3.
- Press Power key and Volume up button together with Home button.
- After you press, you will see recovery screen as below . Then, you can enter the phone’s boot menu.
- click the power key, go down and Tap on ‘Wipe data/factory reset‘.
- Now select ‘Yes-delete all user data‘ by taping the power key.
- At last, click on the power button to verify the reset.
Ultimate Solution for “low audio calls”
This is Ultimate Solution its means, If this does not work then you definitely have to repair your device. In this section, we are going to reinstall/re-Flash Stock ROM. Stock ROM is, the original or you can say, official software designed by the original device manufacturer for that particular device. We have Dedicated Flashing Guides. you can follow one of them to flash your device – How to Flash Stock ROM on Meizu MX3 Step by Step
Contact your network operator
The ultimate tip when you are still having the issue of low audio on calls issue is just to get support from the provider of your network. For sure, this is the final solution for low audio on calls in Meizu MX3. if the issue of the low audio call happens Even after you perform the factory reset, you need to contact network providers in your area.
At times, the problem may occur due to their failure in software or service. Indeed, you can clearly elaborate on the problem and discuss it with the experts. It will useful for you to get help from an expert in the technical field. Do not waste the time by contacting the sales or marketing-related providers. Because even though they have the knowledge of the Meizu MX3, they will not have knowledge of network services. In fact, you better contact a technical person to fix the issue.
Frequently Asked Question
low audio on calls after water damage
Important! The first thing you need to do is check if the device is dry. You can dry your device by following 3 steps.
- Keep the Device in a dry place for about 5-8 hours to evaporate the moisture.
- Use a hairdryer to remove any liquid from the Device. (Do it at your own risk)
- Keep the Device in a bag full of rice for about 48 hours. (Recommed Method)
It does not work? Read More: How to fix Android Device after falling into the water
“low audio on calls” after a drop
First of all, Follow the above Guide Step by step. specially Factory Reset option. If it does not work, It sounds like a hardware issue which means you need to repair your phone. You can repair it yourself, but you will need the tools, speakers, and expertise to do it properly, and if you do, it will void the warranty. so you had better go to an authorized shop Read More : How To Fix Android Device Not Turning On After Drop
Fix “low audio on calls” after Meizu MX3 update?
This may happen when we update our Meizu MX3, device features may be unavailable without any notification. This happens for a variety of reasons. Most likely a cache issue. So be sure to clear the cache first. Follow this link to know more about this.- Clear Cache. Sometimes, the cache may not be the reason. Then you have to reinstall your android software. Find out more about Stock Firmware, or you have to wait for the next update.
“low audio on calls” After Flashed Custom Firmware (Beta version)?
These custom firmwares are still being tested, so some features may not work properly. You have two options to resolve this issue, you can switch to another supported custom ROM, or you can flash the original Stock ROM that came with your device. Read More: How to Flash Stock ROM on Meizu MX3 Step by Step
Contact Us
Thank you so much for coming to the “SIM card undetected error on Meizu MX3” guide. If this guide has helped you in any way, please share your thoughts in the comments section, and don’t forget to share this site on Facebook and Twitter so others can get help from our site. Finally, we welcome you to ask any questions in this regard, we have created a separate forum for your detailed questions, go to it and ask your question under the correct section, then we will help you individually.